The Pnu-Point Pointing and Grouting Tool 

Super for brickwork, stonework, cobbles, paving and brick slips

It's the pointing tool that works.

 Powered by low pressure compressed

 air  (32 psi / 2 bar), the tool has no moving parts. 

Nothing to go wrong: just keep the tool clean.

Despite price increases on virtually every item that goes into the Pnu-Point Pointing Tool we purchase  we are holding all our prices for another year.

 The tool is sold wherever there is pointing to be done: virtually all countries in Europe, the USA and Canada, Australia, New Zealand. We have even sold to China and Japan!

The tool might seem expensive , but customers tell us that they get their money back in the first day or two of use.

 The Pnu-Point Tool enables you to point faster and cleaner with virtually any mortar.

The Pnu-Point pushes the mortar to the back of the joint, so completely filling it.

The Pnu-Point is clean to use and easy to clean after use: just wash out with water.

The Pnu-Point has no moving parts so nothing to go wrong.

Customers tell us that they can point 50 square metres or more of brickwork per day with the Pnu-Point. 

Feed back from customers:

• before they purchased the Pnu-Point they were tired of shoving mortar into joints, had aching wrists from using hand powered glorified mastic guns, or were fed up with repairing and unblocking auger type pointing tools.

• the tool is quick and easy to to use, good with any mortar, cement or lime (except lime putty). Works wonderfully with bagged ready mixed mortars, but do not need to buy them as it works just as well with local sands.

• the Pnu-Point fills joints from the back of the joint, does not bleed onto the face of the work and wastes very little mortar.

• lime (hydraulic ) mortars, cement mortars with local sand all work well with the Pnu-Point. Expensive bagged mortars are not required.

• the Pnu-Point pays for itself in the first day or two of use.

You might have read the reviews on U-TUBE: some of of them are adverse but if you look at the writers you will see that they are voicing opinions without having used the Pnu-Point tool: just look at some of the quality work carried out by our customers.

We have customers across the world: USA, Canada, New Zealand, Australia, France, Germany, Italy, Holland, Denmark, Sweden, Slovenia, Canary Islands, Spain, Poland, Finland and of course nearer to home: Ireland, Scotland, Wales, Channel Isles and England. We have even sold in Japan to re-point the fire bricks in a blast furnace and to China to point light weight brick slip panels!

Carriage in the UK is always next day dispatch with Parcelforce48 .

Carriage to the US and Canada usually takes around 4 days.

Carriage to most parts of Europe before  BREXIT  usually took about 2 days. Unfortunately it now takes about a week.

Here is a sample of projects carried by our customers: to read more about these and other projects click here

or go to our "Customers Projects" page or go straight to the shop and buy one! Click here !

Brickwork

Stonework

Brick Slips

to read more about these and other projects click here
or go to our "Customers Projects" page

Or if you have seen enough and want to order either telephone us at 01913869358, email This email address is being protected from spambots. You need JavaScript enabled to view it., or go to our web shop by clicking here or the Pnu-Point Store tab at the top of the page.

If you have any queries do not hesitate to call or email us. We are here to help!